Controller expansion and sensors

Wireless Temperature Sensor

rf_batt
rf_batt
The battery-powered Wireless Sensor allows additional expandability with any ezeio Controller.  Operating on standard AA batteries that can last up to 2 years, it has built in sensors for More Info »
by Niklas Zandelin

Wireless I/O expander for the ezeio Controller

RF exp – 400 – nobg
RF exp - 400 - nobg
This wireless expansion module adds four general purpose inputs and two outputs to the ezeio controller. The module communicates wirelessly with the ezeio controller and is very easy to set up. More Info »
by Niklas Zandelin

Thermostat T32P

T32P thermostat
The T32P programmable thermostat
The T-32-P is a single zone thermostat, capable of running one, two or three stage systems. Up to 8 thermostats can be connected to a single ezeio. More Info »
by andreh

10 Analog in, 8 Relay, 4 Analog out expansion (Modbus)

T34AO
10 AIN, 8RE, 4AOUT expansion (Modbus)
This I/O expansion module adds 10 inputs, 8 relays and 4 analog outputs to the ezeio system. The inputs can be wired to thermistors, voltages (0-3V) or More Info »
by andreh

Current transducer

currenttransducer
Current Transducer DC out
This small and easy to use split-core current transducer clamps around wires up to 7.5mm (0.3") in diameter. The CT outputs a DC voltage that is linear More Info »
by andreh

Temperature & Relative Humidity sensor

ml-temp-rh
ml-temp-rh
Combined temperature and relative humidity sensor that connects directly to the ezeio controller via Microlan. More Info »
by andreh

Temperature sensor

ML-Temp-3m-400
ML-Temp-3m-400
An accurate temperature probe for the MicroLAN bus. 3m (10ft) wire with stainless steel encapsulated probe. More Info »
by andreh

Expansion modules and sensors

Easily add sensors and modules, including inputs and outputs, to the ezeio Controller. The base controller has four analog inputs and two relay outputs. These modules and sensors connect to the ezeio controller via Modbus, Microlan or wireless and adds additional resources that can be accessed by the controller.