The Dent PowerScout 3 is a Wattmeter that features inupt voltages from 100 to 600 V, Delta or Y connections, and an interface that allows direct use of flexible CTs. It also has insulated voltage connections and two intregrated relay outputs.
More Info »
Products
WattNode®, three phase energy meter
WattNode® Wattmeter for ModBus The WattNode® ModBus Wattmeter is a kilowatt hour kWh energy and power meter that communicates with the ezeio controller over a RS-485 network.
More Info »
Wireless Temperature Sensor
The battery-powered Wireless Sensor allows additional expandability with any ezeio Controller. Operating on standard AA batteries that can last up to 2 years, it has built in sensors for
More Info »
ezeio Controller - Standard
The ezeio is a secure and simple networked control solution. With general purpose inputs and outputs, ModBUS and Microlan interfaces it can be used for logging, monitoring and control of just about anything. Secure communications, very simple setup and management and a powerful web-based service makes the ezeio one of the most powerful and low-cost solutions available.
More Info »
Current Transformers
Current transformers for use with Watt meters. There are many types and sizes.
More Info »
Wireless I/O expander for the ezeio Controller
This wireless expansion module adds four general purpose inputs and two outputs to the ezeio controller. The module communicates wirelessly with the ezeio controller and is very easy to set up.
More Info »
Thermostat T32P
The T-32-P is a single zone thermostat, capable of running one, two or three stage systems. Up to 8 thermostats can be connected to a single ezeio.
More Info »
ezeio Controller - Wireless
This is the standard ezeio controller with a short range wireless transceiver built-in. The radio is used for adding wireless sensors, inputs and outputs to the system. It has a range of up to 100m (300ft) and is using a secure, frequency agile protocol on the 868/900Mhz bands.
More Info »
CO2 sensor
Wallmount CO2 meter for HVAC applications. Modbus communication.
More Info »
10 Analog in, 8 Relay, 4 Analog out expansion (Modbus)
This I/O expansion module adds 10 inputs, 8 relays and 4 analog outputs to the ezeio system. The inputs can be wired to thermistors, voltages (0-3V) or
More Info »
ezeio Controller - Cellular
With both the local 868/900MHz radio and the GSM/3G/GPS modem added to all the standard features of the ezeio Controller, this is our top end product. All models of the ezeio Controller share the same simple setup process and flexible configuration.
More Info »
ZigSense Wireless Sensor Network
ZigSense™ is an Australian design and made line of wireless sensors utilizing ZigBee™ mesh and Digimesh™ wireless network technologies as its core communication channels. ZigSense systems contain
More Info »
16 Analog in, 4 Digital in, 2 Relay, 2 Analog out
The Intech A16 is a capable I/O device with plenty of connectivity options. This device is ideal for high accuracy RTD or thermocouple sensors.
More Info »
Measurlogic Energy meters
The Measurlogic DTS series meters accurately monitor electrical power and energy and are available for DC or 3 phase AC circuits
More Info »
Variable Frequency Drives
The ezeio Controller is compatible with Invertek ModBus VFDs. These drive are all special order and are sold per application. Please call for more information.
More Info »
WattsOn Power Transducer
The Elkor WattsOn Power transducer is a 3-phase power/energy meter with Modbus communication and several CT options.
More Info »
EZMeter
The EZMeter is a small, low cost, Modbus enabled three phase Watt hour meter. The standard 120/240V model is UL listed. Support for other service types are also available.
More Info »
GPS magmount antenna
GPS antenna with magnetic mount for controllers with GSM/3G/GPS modem.
More Info »
Modbus Cable Replacement Radios
These radios create a wireless bridge for devices that communicate via Modbus. They are sold in matched pairs and have a range of up to 150m (500ft).
More Info »
PoE kit
Passive PoE kit that works with the standard power supply and the ezeio.
More Info »
controller test product
I wonder where this ends up - this is the excerpt..
Aha! So I can write a short description here, and the system adds a link to the product page. That's nice!
Would be even nicer if I got a full blown editor for the ecerpt though..
More Info »
Aha! So I can write a short description here, and the system adds a link to the product page. That's nice!
Would be even nicer if I got a full blown editor for the ecerpt though..
More Info »
Current transducer
This small and easy to use split-core current transducer clamps around wires up to 7.5mm (0.3") in diameter. The CT outputs a DC voltage that is linear
More Info »
Temperature & Relative Humidity sensor
Combined temperature and relative humidity sensor that connects directly to the ezeio controller via Microlan.
More Info »
Temperature sensor
An accurate temperature probe for the MicroLAN bus. 3m (10ft) wire with stainless steel encapsulated probe.
More Info »
Microlan HUB
Allows you to easily connect up to five additional Microlan devices to the ezeio controller.
More Info »