The T-32-P universal thermostat is a perfect mix of estethics, intuitive operation and performance. The T-32-P is compatible with most residential and commercial HVAC systems, and is perfectly suitable for use with the ezeio Controller.
The ezeio controller can communicate with up to eight (8) thermostats connected via Modbus. While the T-32-P thermostat is capable of running standard weekly schedules independently, connecting it to the ezeio controller adds more scheduling features, remote access, logging and the ability to alterthe thermostat mode based on external input, such as motion detectors, remote commands via E-mail or web, or even weather forecasts.
|Dimensions:||4” High x 4.375” Wide x 0.875” Deep|
|Input voltage:||24VAC 50/60 Hz +/- 15%|
|Relay rating:||24VAC @ 1 Amp maximum per relay|
|Operating temperature:||32° F to 122° F|
|Operating RH:||0-95% (non-condensing)|
|Storage temperature:||32° F to 105° F|
|Display size:||2.75” W x 1.875” H|
|Accuracy:||+/- 0.3° @ 77° F|
|Temperature sensor(s):||10K NTC type 3|
|Stage delays:||Minimum change over time method|
|Timed upstage:||5 – 90 minutes|
|Short cycle protection:||Off to 4 minutes|
|Cycle rate:||Unlimited, 30, 10 or 6 (installer set)|
|Display resolution:||0.1° F|
|Control range:||Off to 100° F|
|Outdoor temp display:||-20 – 140° F|
|Back light:||Blue EL (Electro Luminescent)|
|Back light life:||3,000 hours to half brightness|
|Optimized Start/Stop:||Time vs. temp differential – updating|
|Fan speeds:||Difference between setpoint and
|Approvals:||FCC Part 15 (pending), C-tick|
This product is typically available in limited quantities directly from eze System. Please contact us for up to date availability.